Cell Voltage Under Load = Volts
Pack Voltage Under Load = Volts
Power Output Under Load = Watts
Motor R.P.M.
Discharger Design
Note: To gain a bigger power rating in a resistor you can put them into parallel, this with half the resistance and double the wattage.
If for example you wanted 3.4 Ohms 50Watt resistor, you could use two 6.8 Ohm 25Watt resistors in parallel to get the same value.
Charging Time
Charging Current
Note: It is recommended that batteries are only given fast charges (below 2 hours) occasionally, as they do start to deteriorate with high charging currents.